• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement Upvc Window Handles

Almost all replacement glass for windows window handles made of upvc include everything you require, however if the previous handle had screws or pins that held it in place, they will need to be removed. Then, remove the'snap-in' cover at the handle's base.

The next step is to determine the type of window and lock that your new handle is for It is essential!

Espag

Espag handles are a set of multipoint locks that are suitable for casement windows like uPVC or wooden double glazing. They come with a 7mm square spindle which can be fitted into the gearbox on a uPVC window and when the handle is turned, it opens with a series of locks that run around the perimeter of the window. Espag handles are also referred to as shootbolt handles and provide extra security compared to the conventional single point lock found on older frames.

There are many options available with cranked and inline handles that can be operated with either the left or right hand. There are also ergonomic handles that enhance the appearance and feel of your window, as well as handles.

If you're looking to replace your existing uPVC window handle with an espag handle, you'll have to determine the size of the spindle installed and measure it from the base of the handle to ensure that you get the right replacement windows glass. This measurement is known as step height. It will help you find the perfect uPVC handle for your home.

If you require to remove screws that hold the handle, use pliers or a screwdriver. After you have removed the screws or pins that hold the spindle in place, you can disassemble the handle.

After removing the handle you can open the locking mechanism within the frame of the windows and take out the cockspur block that is attached adjacent to the handle. This will allow the window to be opened. The replacement uPVC handles you have ordered will be able to slide onto the cockspur block before sliding into the handle spindle to allow the window to open again. The ideal solution is to replace the cockspur wedge block with an entirely new one when you change your uPVC handle to ensure it is securely secured.

Cockspur

Cockspur handles are generally found on older uPVC and aluminium windows. The handle rotates and closes onto an aluminum wedge-shaped receiver catch (not to be confused with timber window latches that are also covered in this section). These handles are available in lockable and nonlockable models. They are available in different nose heights that can be adapted to the existing frame.

The handle locks with a small spur (little triangle bit) pulling against a wedge of plastic that is fixed to the frame. These are usually one-way handles, but the deadlock that locks is a possibility to add additional security.

Similar to Espag handles cockspur handle replacements are simple to install all you need is new screws (supplied) and the proper backset. The backset is measured from the baseplate to the nose on the underside of the handle. In general Aluminium window frames usually have a 9mm backset, while UPVC employs a 21mm. There are also many variations, so it's essential to measure before buying the handle.

This type of window handle can be substituted by simply removing the existing handle and then removing the spindle, or in some instances, the entire handle assembly. The replacement handle can then be screwed into place with two pozidriv screws. The pozidriv screws are available in zinc or brass finishes to match the hardware. There is also the option of a self-locking version.

It is a simple to install replacement for the cockspur handle that is perfect for repairing or replacing old uPVC windows, they have a universal design which makes them suitable for a variety of profiles and backsets. Each handle comes with 3 packers of different thickness, these are neatly placed on the underside of the handle nose and can be combined in different ways to achieve backsets of 9-13mm, 17mm and 21mm. They are available in left and right handed models and are available with lockable or nonlockable versions with a range of nose heights.

Tilt and Turn

The top European window style of tilt and turn has been in use in Europe for decades, but it is only now starting to gain popularity in the Americas. They combine the functionality of three different window types into one - tilt, pivot, and in-swing. They are ideal for older homes as they provide more ventilation than conventional windows.

When tilt and turn windows are closed, they lock like any other fixed window. By turning the handle either 90or 180 degrees, based on the tilt-and-turn type of window, the sash will open inwards and the window tilts inward to allow air exchange. This is a great way to allow air circulation without having to open a large windows that could be dangerous.

If the handle is turned another 90@ or 180@ the sash can be fully opened as doors. This allows for full air circulation which is especially useful for draughty houses or rooms where smoke or other odors can accumulate. This makes it easier to clean the glass's exterior, as you can do it from inside your home. This is a task that often requires a lot of risk.

Tilt and turn windows are also extremely secure. When they are locked in the closed position, they are very difficult to open from the outside, and they feature double seals that stop rainwater from getting into the home when in the tilted or in-swing position. This is a beneficial feature for older homes, where burglars are more likely to target traditional windows that are opened from the side hinges.

Spade

There are several different types of handles that are able to be fitted on upvc double-glazed windows. There are two primary kinds of handles: Cockspur and Espag. Other choices include tilt and turn handles, spade or blade handles, monkey tail handles, and various other kinds. The kind of handle you pick will depend on the style you prefer and the type of window you have.

You must be aware of how your current handle is connected to the frame to choose the right replacement upvc handle. This is known as handing. It is an essential piece of information, especially when shopping online, as certain handle styles don't work with all windows. Some cockspur handles, for instance, are angled, while others are straight, and can turn left or right. You'll also require the spindle's size which is the distance between the base of handle and the head of handle.

Identifying if your windows need a restrictor is also essential when choosing the correct handle. They are usually used in high-rise flats or commercial buildings, but are not required for homes that are primarily residential. Additionally, you must consider step height which is the distance from the bottom of the screw plate to the top of the handle.

The word spade originates from Old English spadu, spaedu or spada. It has been translated into a variety of languages, including German spaten and Low German spathen. In the 1920s, during the Harlem Renaissance in New York City spade started to be used as a derogatory term for black people. Spade has since risen to prominence in pop culture and is a widely-respected symbol of African American heritage and pride.

When replacing a Cadenza style handle, it's essential that you get the right size. The handles are available in straight and angled designs that differ by a few millimetres. The handle head may change between a D and a T-shaped shape, or even have no handles at all.