• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However If windows with double panes are anchored by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance, you will need to find some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall on the fabric rather than on the floor where they could be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your home until a professional arrives to fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the distance between the door and the window is significant, you may need to consider a security screen that also includes a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, with time, they can suffer from a variety of issues like sliding. A sagging window can cause problems with light, draughts or even security. It's crucial to act immediately if you notice your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. Then, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, near by close your window and check for fit. If you're happy with the fit, tighten the screws to ensure that they remain in the right place.

If you can't reposition the hinges, near By you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Often, this is caused Near By screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is crucial to take action if you wake up every morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most often, uPVC window repairs leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the issue is, old caulking may have to be removed. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window harder to clean and lower its energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double glazing repairs-glazed window, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze it could be the hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It is very easy to replace a hinge on a window but it's much easier if someone else helps hold the frame.

Verify that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window incorrectly or a faulty installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to provide suggestions.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges can also become disaligned as a result of wear, causing an opening where the sash and frame meet. If they're beyond repair, it could be necessary to have them realigned. In addition, the interlock could also become unbalanced. This happens on the hinge's side and might require to be cleaned. In some cases it is possible to replace the hinges.

The next common reason for draughts is window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it could be more cost-effective to simply replace them than to repair them. If you have any problems with your Upvc window it is recommended to speak with a professional as soon as possible.