• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace and typically fit into frames that were previously in use very easily. However, if you have double-pane windows that are secured by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will stop water and uPVC window repairs drafts from entering your property until a professional is able to repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time they may be afflicted by a variety of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows to reach the frame. Then, you can remove the top and bottom hinges using a screwdriver and UPVC Window Repairs adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the fit of your window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The corners of the sash must be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is important to take action if you get up each morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double glazing-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze, it may be the hinges that are at fault. They can be repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change a window hinge however it is easier if someone else helps you to hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or due to improper installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are always happy to offer assistance.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also reduce the chance of windows sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges may also become disaligned as a result of wear, creating an opening where the sash meets frame. They can be repaired by giving them good cleaning, but when they're beyond repair, it could be necessary to get them aligned or replaced. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it may be possible to just give them a thorough clean, however in some cases it might be necessary to have them replaced.

The second most frequent reason for draughts are the window seals, these can become worn down or damaged over time, and let air escape through these gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. It is essential to remember that all windows eventually get worn out and it may be more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.